General - BPP, HEP103

HEP1 Range - Compact Pumps

Go Back

The HEP1 electric driven, pendant controlled compact pumps are built for a wide variety of industrial applications and combine robust performance, flexible configuration, and ease of transport.

With a two-stage pump design, the HEP1 delivers exceptional efficiency and speed. The 1st stage delivers oil up to 158.66 cubic inches per minute, while the 2nd stage delivers 21.97 cubic inches per minute for precise high-pressure operation (60 Hz models deliver approximately 15-20% higher flow rates). HEP1 pumps operate up to a maximum working pressure of 10000 psi and include an automatic low-to-high pressure changeover for seamless performance.

The HEP1 range offers a choice of electric motors and control valves, allowing users to configure the pump to meet operational needs. Its compact design with integral carrying handle ensures easy transportation while the rugged design and IP55 rating keep it running in the toughest industrial environments.

  • Working pressure 10000 psi
  • Two stage operation
  • Usable oil reservoir capacity 1.06 gallons
  • Choice of 110V 50 Hz, 120V 60 Hz, 230V 50 Hz, and 220V 60 Hz single-phase electric motors
  • Choice of 3-way dual-purpose valve (advance/auto retract for crimping and cutting and advance/hold/retract
  • for lifting) and 4-way manual valve with load holding
  • 3-way and 4-way valves available with or without externally adjustable pressure relief valve and pressure gauge
  • Internal pressure relief valve set at 10000 psi
  • Remote hand pendant controller with 10 feet control cable
  • Ingress protection tested and IP55 rated
Download Enquire
Electric Driven Two Stage Compact Pumps
Electric Driven Two Stage Compact Pumps
Model Number Valve Type *Usable Oil Cap. gallons Maximum flow rate inch³/min Motor Voltage Model Number (60 Hz motor) **Weight lbs
1st stage 2nd stage
HEP1341 3-way 1.06 158.66 21.97 110V 50 Hz - 1Ph HEP1341H 54.0
HEP1341R 3-way 1.06 158.66 21.97 110V 50 Hz - 1Ph HEP1341HR 56.2
HEP1342 3-way 1.06 158.66 21.97 230V 50 Hz - 1Ph HEP1342H 54.0
HEP1342R 3-way 1.06 158.66 21.97 230V 50 Hz - 1Ph HEP1342HR 56.2
HEP1441 4-way 1.06 158.66 21.97 110V 50 Hz - 1Ph HEP1441H 55.1
HEP1441R 4-way 1.06 158.66 21.97 110V 50 Hz - 1Ph HEP1441HR 57.3
HEP1442 4-way 1.06 158.66 21.97 230V 50 Hz - 1Ph HEP1442H 55.1
HEP1442R 4-way 1.06 158.66 21.97 230V 50 Hz - 1Ph HEP1442HR 57.3

*Total oil reservoir capacity 1.85 gallons (approx.)

**Weight including oil filled to maximum level

Note:

1) All 110V and 230V models are supplied to run at 50 Hz as standard, refer to the table for pumps with 60 Hz motor. 60 Hz models operate at 120V and 220V and deliver approximately 15-20% higher flow rate.

2) Pumps with a suffix 'R' in the model number are fitted with an externally adjustable relief valve and glycerin filled pressure gauge.


Model Number Dimensions in inch
A B C D E
HEP1341 17.73 6.3 9.46 13 13
HEP1341R 17.73 6.3 9.46 13 13
HEP1342 17.73 6.3 9.46 13 13
HEP1342R 17.73 6.3 9.46 13 13
HEP1441 17.73 6.3 9.46 13.79 13
HEP1441R 17.73 6.3 9.46 13.79 13
HEP1442 17.73 6.3 9.46 13.79 13
HEP1442R 17.73 6.3 9.46 13.79 13