LIKE FACEBOOK

Tweet Feed

Instagram Feed

  • Had a chance to see STS6 Model Tensioners being made at #hiforce headquarters #tensioners #winshawhydraulictools
  • Structural bolt tightening works were carried out on a 50 metre cycle track bridge in Malaysia using Hi-Force TWP22S pneumatic torque multiplier with respective sockets. A total of 568 bolts were tightened within three days and involved tightening of M24, M27 and M30 bolts to a specific torque. #hiforce #bolttightening #torqueing #torquemultiplier
  • Lifting the rear of Saipem FDS2 pipelayer vessel to carry out repair works #hiforce #cylinders #shiprepair
  • Bolt torqueing works at Bloomberg site in London  #hiforce #torquewrench #bolttightening
  • Introducing BOLTRIGHT PRO - the innovative bolted joint integrity software from Hi-Force. Visit www.hi-force.com for more details. #hiforce #boltingtools #boltrightpro
  • Maintenance works carried out on tidal bridges at Richards Bay Coal Terminal in South Africa  #hiforce  #hydrauliccylinders
  • Hi-Force ToughLift model TLA10021 lifts Caterpillar 785C Rock trucks at the mines in North East Michigan #hiforce #toughlift
  • The new and improved Toughlifts from Hi-Force #hiforce #toughlift
  • Synchronous lifting of a road bridge in Scotland  #hiforce #HSPsplitflowpump #PLCcontrolsystem
  • Introducing BOLTRIGHT PRO - the innovative bolted joint integrity software from Hi-Force. Visit www.hi-force.com for more details. #hiforce #boltingtools #boltrightpro
  • Bolt torqueing works at Bloomberg site in London  #hiforce #torquewrench #bolttightening
  • Lifting the rear of a Saipem FDS2 pipelayer vessel to carry out repair works http://ow.ly/4n1FCo  #hiforce #cylinders #shiprepair
  • Structural bolt tightening works were carried out on a 50 metre cycle track bridge in Malaysia using Hi-Force TWP22S pneumatic torque multiplier with respective sockets. A total of 568 bolts were tightened within three days and involved tightening of M24, M27 and M30 bolts to a specific torque. #hiforce #bolttightening #torqueing #torquemultiplier
  • International airport terminal construction at Incheon, South Korea  #hiforce #customisedcylinders #HEPpumps
  • Yüksek debili, kapalı fan soğutmalı ve sessiz çalışma özelliği ile harici ve dahili kullanıma uygun
  • Presle monte edilmiş parçaların, tekerleklerin, dişlilerin, cer dişlilerinin, makaraların vb. gibi birçok parçanın sökülmesi işinde kullanılabilen
  • En zor civatalama işlemlerinin bile doğru ve hızlı bir şekilde yapılmasına imkan veren, bağlantı için kullanılan kare başlık tipi ile hızlı bir şekilde aparat sökme ve takma yapılmasını sağlayan, kompakt, hafif, alüminyum ve 360 derece dönebilen bağlantı noktası ile

SLV Range

SLV Range
  • Working pressure 10000 psi
  • Control from 8 to 32 lifting points
  • Variable speed control

The SLV range has been designed for precise lifting and lowering of heavy loads using multiple synchronized hydraulic cylinders. The system comprises of a heavy duty three phase electric motor, operator control panel to monitor up to 32 channels and a robust framework for transportation and storage of the entire system.

The SLV allows control from 8 to 32 lifting points and the system can be adapted to suit customer's special lifting requirements. Customized systems can also be tailored for unique application requirements.

  • High efficiency three phase variable speed drive motor
  • Two stage pump delivering up to 1196.06 inch3 in low pressure and up to 292.91 inch3 at 10000 psi
  • Selection of outlet valves with single or double acting controls on each outlet
  • 10000 psi pressure transducers fitted as standard on each outlet
  • Reservoir capacity of 52.82 and 105.64 litres
  • Intuitive touch screen controller with display options: Stroke length, Cylinder load or Total load and Center of Gravity
  • String pot sensors as standard with alternatives available on request
  • Operating modes include Manual Lift/Lower, Automatic Lift/Lower and Automatic Preload

 

SLV Range

Specifications

Model No. No. of outlets Oil Cap. (litres) Total oil flow per outlet (in3/min) Motor voltage
1st stage 2nd stage
SLV82 8 200 1196.06 292.91 380/440V-3Ph
SLV122 12 200 1196.06 292.91 380/440V-3Ph
SLV162 16 200 1196.06 292.91 380/440V-3Ph
SLV202 20 200 1196.06 292.91 380/440V-3Ph
SLV242 24 200 1196.06 292.91 380/440V-3Ph
SLV282 28 200 1196.06 292.91 380/440V-3Ph
SLV322 32 200 1196.06 292.91 380/440V-3Ph
SLV84 8 400 1196.06 292.91 380/440V-3Ph
SLV124 12 400 1196.06 292.91 380/440V-3Ph
SLV164 16 400 1196.06 292.91 380/440V-3Ph
SLV204 20 400 1196.06 292.91 380/440V-3Ph
SLV244 24 400 1196.06 292.91 380/440V-3Ph
SLV284 28 400 1196.06 292.91 380/440V-3Ph
SLV324 32 400 1196.06 292.91 380/440V-3Ph

Note: All models are suitable for operation at 50Hz and 60Hz

Mounting Kits

Mounting kits to fit single and double acting cylinders are listed below.

Model Number Mounting kit type Applicable cylinder Increase in cylinder height inch
SLMK-1 1 HSS - 25T +0.14
1 HSS - 30T +0.14
SLMK-2 2 HAS - 30T +0.39
2 HRA - 30T +0.39
SLMK-3 3 HSS - 50T +0.39
3 HAS - 50T +0.39
3 HRA - 50T; +0.39
SLMK-4 4 HSS - 75T +0.39
SLMK-5 5 HSS - 100T +0.39
5 HAS - 100T +0.39
5 HRA - 100T +0.39
SLMK-6 6 HDA - 25T +0.43
SLMK-7 7 HDA - 50T +0.39
SLMK-8 8 HDA - 100T +0.39
SLMK-9 9 HDA - 150T +0.39
9 HDA - 200T +0.39
SLMK-10 10 HHS - 20T +0.43
SLMK-11 11 HHS - 30T +0.47
11 HHR - 30T +0.47
SLMK-12 12 HHA - 37T +0.04
SLMK-13 13 HHA - 50T +0.04
SLMK-14 14 HHS - 60T +0.47
14 HHR - 60T +0.47
SLMK-15 15 HHS - 100T +0.39
15 HHR - 100T +0.39
SLMK-16 16 HHR - 150T +0.39
SLMK-17 17 HHR - 250T +0.39
SLMK-18 18 HFA - 30T 0
SLMK-19 19 HFA - 50T +0.32
SLMK-20 20 HFA - 100T 0
20 HGG - 150T 0
SLMK-21 21 HDA - 300T 0
SLMK-22 22 HDA - 400T 0
22 HDA - 500T 0
SLMK-23 23 HDA - 800T 0
23 HDA - 1000T 0
23 HFG - 800T 0
SLMK-24 24 HFL - 50T +0.32
24 HFG - 50T +0.32
SLMK-25 25 HFG - 400T 0
25 HFG - 500T 0
25 HGG - 200T 0
25 HSG - 200T 0
SLMK-26 26 HFL - 100T +0.35
26 HFG - 100T +0.35
SLMK-27 27 HFL - 150T +0.32
27 HFG - 150T +0.32
27 HFG - 200T +0.32
27 HSG - 150T +0.32
SLMK-28 28 HFG - 250T 0
28 HFG - 300T 0
28 HGG - 300T 0
SLMK-29 29 HSG - 300T 0
SLMK-30 30 HFL - 250T +0.32
SLMK-31 31 HFL - 400T +0.39
SLMK-32 32 HFL - 500T +0.39
SLMK-33 33 HFG - 1000T 0

Displacement Sensors

  • 25 inches (635 mm) string pot
  • Provides stroke feedback to controls
  • Includes magnet for mounting
  • Each lifting point requires one sensor
  • String pot displacement sensors as standard, other displacement sensors available on request
Model Number Type and Stroke (inch)
SLDS650 25.61

Sensor Cables

  • Each displacement sensor requires one cable
Model Number Length (ft)
SLDC10 33
SLDC25 82
SLDC50 164
SLDC75 246
SLDC100 328