LIKE FACEBOOK

Tweet Feed

Instagram Feed

  • Had a chance to see STS6 Model Tensioners being made at #hiforce headquarters #tensioners #winshawhydraulictools
  • Structural bolt tightening works were carried out on a 50 metre cycle track bridge in Malaysia using Hi-Force TWP22S pneumatic torque multiplier with respective sockets. A total of 568 bolts were tightened within three days and involved tightening of M24, M27 and M30 bolts to a specific torque. #hiforce #bolttightening #torqueing #torquemultiplier
  • Lifting the rear of Saipem FDS2 pipelayer vessel to carry out repair works #hiforce #cylinders #shiprepair
  • Bolt torqueing works at Bloomberg site in London  #hiforce #torquewrench #bolttightening
  • Introducing BOLTRIGHT PRO - the innovative bolted joint integrity software from Hi-Force. Visit www.hi-force.com for more details. #hiforce #boltingtools #boltrightpro
  • Maintenance works carried out on tidal bridges at Richards Bay Coal Terminal in South Africa  #hiforce  #hydrauliccylinders
  • Hi-Force ToughLift model TLA10021 lifts Caterpillar 785C Rock trucks at the mines in North East Michigan #hiforce #toughlift
  • The new and improved Toughlifts from Hi-Force #hiforce #toughlift
  • Synchronous lifting of a road bridge in Scotland  #hiforce #HSPsplitflowpump #PLCcontrolsystem
  • Introducing BOLTRIGHT PRO - the innovative bolted joint integrity software from Hi-Force. Visit www.hi-force.com for more details. #hiforce #boltingtools #boltrightpro
  • Bolt torqueing works at Bloomberg site in London  #hiforce #torquewrench #bolttightening
  • Lifting the rear of a Saipem FDS2 pipelayer vessel to carry out repair works http://ow.ly/4n1FCo  #hiforce #cylinders #shiprepair
  • Structural bolt tightening works were carried out on a 50 metre cycle track bridge in Malaysia using Hi-Force TWP22S pneumatic torque multiplier with respective sockets. A total of 568 bolts were tightened within three days and involved tightening of M24, M27 and M30 bolts to a specific torque. #hiforce #bolttightening #torqueing #torquemultiplier
  • International airport terminal construction at Incheon, South Korea  #hiforce #customisedcylinders #HEPpumps
  • Yüksek debili, kapalı fan soğutmalı ve sessiz çalışma özelliği ile harici ve dahili kullanıma uygun
  • Presle monte edilmiş parçaların, tekerleklerin, dişlilerin, cer dişlilerinin, makaraların vb. gibi birçok parçanın sökülmesi işinde kullanılabilen
  • En zor civatalama işlemlerinin bile doğru ve hızlı bir şekilde yapılmasına imkan veren, bağlantı için kullanılan kare başlık tipi ile hızlı bir şekilde aparat sökme ve takma yapılmasını sağlayan, kompakt, hafif, alüminyum ve 360 derece dönebilen bağlantı noktası ile

SLF Range

SLF
  • Working pressure 700 bar
  • Control from 4 to 8 lifting points
  • For use with standard single or double acting cylinders

The SLF range has been designed for precise lifting and lowering of heavy loads using multiple synchronised hydraulic cylinders. The system comprises of a heavy duty three phase electric motor, operator control panel to monitor up to 8 channels and a robust framework for transportation and storage of the entire system.

The SLF allows control from 4 to 8 lifting points and the system can be adapted to suit customer's special lifting requirements. Customised systems can also be tailored for unique application requirements.

  • High efficiency three phase motor
  • Selection of outlet valves with options of 3-way and 4-way valve configurations
  • 700 bar pressure transducers fitted as standard on each outlet
  • Reservoir capacity of 100 litres on the 4-outlet pump and 200 litres on the 6-outlet and 8-outlet pumps
  • Intuitive touch screen controller with display options: Stroke length, Cylinder load or Total load
  • String pot sensors as standard with alternatives available on request
  • Operating modes include Manual Lift/Lower, Automatic Lift/Lower and Automatic Preload
SLF Range

Specifications

Model No. Number of outlets Oil capacity (litres) Oil flow per outlet (litres/minute)e Motor voltage
SLF4S 4 100 1.1 380/440V-3Ph
SLF6S 6 200 0.9 380/440V-3Ph
SLF8S 8 200 0.9 380/440V-3Ph
SLF4D 4 100 1.1 380/440V-3Ph
SLF6D 6 200 0.9 380/440V-3Ph
SLF8D 8 200 0.9 380/440V-3Ph

Dimensions in mm

Model No. A B C
SLF4S 1275 1155 675
SLF6S 1550 1300 860
SLF8S 1550 1300 860
SLF4D 1275 1155 675
SLF6D 1550 1300 860
SLF8D 1550 1300 860

Mounting Kits

Mounting kits to fit single and double acting cylinders are listed below.

Model Number Mounting kit type Applicable cylinder
SLMK-1 1 HSS - 25T
1 HSS - 30T
SLMK-2 2 HAS - 30T
2 HRA - 30T;
SLMK-3 3 HSS - 50T
3 HAS - 50T
3 HRA - 50T;
SLMK-4 4 HSS - 75T
SLMK-5 5 HSS - 100T
5 HAS - 100T
5 HRA - 100T;
SLMK-6 6 HDA - 25T
SLMK-7 7 HDA - 50T
SLMK-8 8 HDA - 100T
SLMK-9 9 HDA - 150T
9 HDA - 200T
SLMK-10 10 HHS - 20T
SLMK-11 11 HHS - 30T
11 HHR - 30T
SLMK-12 12 HHA - 37T
SLMK-13 13 HHA - 50T
SLMK-14 14 HHS - 60T
14 HHR - 60T
SLMK-15 15 HHS - 100T
15 HHR - 100T
SLMK-16 16 HHR - 150T
SLMK-17 17 HHR - 250T
SLMK-18 18 HFA - 30T
SLMK-19 19 HFA - 50T
SLMK-20 20 HFA - 100T
SLMK-21 21 HDA - 300T
SLMK-22 22 HDA - 400T
22 HDA - 500T
SLMK-24 24 HFL - 50T
24 HFG - 50T
SLMK-25 25 HFG - 400T
25 HFG - 500T
25 HGG - 200T
25 HSG - 200T
SLMK-26 26 HFL - 100T
26 HFG - 100T
26 HFG - 150T
26 HFG - 200T
26 HGG - 150T
26 HSG - 150T
SLMK-27 27 HFL - 150T
SLMK-28 28 HFG - 250T
28 HFG - 300T
28 HGG - 300T
SLMK-29 29 HSG - 300T
SLMK-30 30 HFL - 250T
SLMK-31 31 HFL - 400T
SLMK-32 32 HFL - 500T

Displacement Sensors

  • 635 mm (25 inches) string pot
  • Provides stroke feedback to controls
  • Includes magnet for mounting
  • Each lifting point requires one sensor
  • String pot displacement sensors as standard, other displacement sensors available on request
Model Number Type and Stroke (mm)
SLDS650 650

Sensor Cables

  • Each displacement sensor requires one cable
Model Number Length (m)
SLDC10 10
SLDC25 25
SLDC50 50
SLDC75 75
SLDC100 100